Remember Me?

» Welcome Guest
[ Log In :: Register ]
Page 1 of 1 Skip to Page:
< Older | Newer >
Topic: Newbie question, volume decrease
Post #1 Skip to the next post in this topic.
Posted On: Oct. 02 2008, 10:30 PM
Peter Phelan

No avatar chosen




Group: Members
Posts: 3
Joined: Oct. 2008

Member Rating: None

Offline
Hi
I have just downloaded the latest version demo and like the look of the software.

However, my test voice over audio tracks decrease in volume steadily. After starting at a normal volume they gradually decreases as I move into the track. I have checked this over and over by speaking at a very constant volume, but this always occurs.

Is this a limitation of the demonstration version, in the same way that the audio has the organ sound inserted? Or is it something to do with the audio settings settings?

I am using an Edorol UA-25 USB soundcard, and Audio Technica 831B condenser lavalier microphone using phantom power fromt eh Edirol. However I'm getting a similar result when using a simple microphone headset plugged into the on-board microphone input of my Toshiba laptop.

I am not getting this effect when using the demo version of Acid Music Studio 7

Any ideas please?
Thanks
Peter
Contact Information:  Peter Phelan

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo:
WEB  
Post #2 Skip to the next post in this topic.
Skip to the previous post in this topic. Posted On: Oct. 02 2008, 10:36 PM
Poppa Willis
Former Member










THIS might help - right click in main OUTPUT METERS - select CLIP if SOFT CLIPPING IS SELECTED UNTICK IT
Contact Information:  Poppa Willis

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo:
WEB  
Post #3 Skip to the next post in this topic.
Skip to the previous post in this topic. Posted On: Oct. 03 2008, 12:35 AM
Peter Phelan

No avatar chosen




Group: Members
Posts: 3
Joined: Oct. 2008

Member Rating: None

Offline
Hi Poppa,

Thanks for the swift response. Unfortuately this brings no improvement. The actual wave form appears ok; it's just the monitored sound gently dies away and then remains at a very soft level.

Mixed the track down to a wav file but that too sounds the same as the preview. Strange; I'll persevere and experiment for the moment

Peter
Contact Information:  Peter Phelan

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo:
WEB  
Post #4 Skip to the next post in this topic.
Skip to the previous post in this topic. Posted On: Oct. 03 2008, 1:06 AM
Bubbagump

Avatar




Group: Members
Posts: 3152
Joined: Sep. 2004

Member Rating: 1.34

Offline
Uncheck the option to reduce track volumes as tracks are added.
Contact Information:  Bubbagump

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo:
WEB  
Post #5 Skip to the next post in this topic.
Skip to the previous post in this topic. Posted On: Oct. 03 2008, 2:18 AM

Avatar




Group: Members
Posts: 3970
Joined: Sep. 2007

Member Rating: 4.2

Offline
Fading down DURING playback may mean there's an inadvertent volume and or pan curve on the track.
Contact Information:  phoo

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo:
WEB  
Post #6
Skip to the previous post in this topic. Posted On: Oct. 03 2008, 8:13 AM
Peter Phelan

No avatar chosen




Group: Members
Posts: 3
Joined: Oct. 2008

Member Rating: None

Offline
thanks Phoo - that was it :) despite removing all "takes" from my test tracks, there was obviously a curve still remaining somewhere from my earlier tests.

Starting a completely new song from scratch and everything is ok

Thanks for that; your comment reminded me of my earlier tests on adjusting the envelope! Now I can continue with my evaluation of the software.

Peter
Contact Information:  Peter Phelan

  • AOL  AOL:
  • ICQ  ICQ:
  • MSN  MSN:
  • YIM  Yahoo:
WEB  
< Older | Newer >
5 replies since Oct. 02 2008, 10:30 PM
Page 1 of 1 Skip to Page:

© 2014 n-Track Software
Powered by iF 1.0.1 © 2006 ikonForums